Escort Prism 20401 Specifiche Scaricare il pdf (Pagina 48)

3-7

MODE for Nellcor MP405 Averaging Time Application

*NORM (NOT USED) (NOT USED) (NOT USED)

FAST (NELLCOR Mode 2) Typically 7-8 seconds for

average pulse.

Varies + – with pulse quality

and other functions.

All monitoring situations.

*SLOW (NOT USED) (NOT USED) (NOT USED)

*Nellcor OxiSmartXL Technology has eliminated the need for operation in NORM and

SLOW modes. Refer to the following NOTE.

NOTE: Since Nellcor OxiSmartXL technology has eliminated the need

for operation in the SLOW mode, and depending on the version of

main software, the following may occur if the SLOW mode is

accidentally selected:

 Pulse waveform will be replaced by dotted lines

 Dashed lines will replace pulse rate

 Dashed lines will replace saturation values

 A“02 WRT ER” message will be posted on the display

Upon returning to NORM or FAST mode, all SPO2 values and

waveform will return, and the “02 WRT ER” message will disappear

from the display.

WARNING: Incorrect sensor application or use may cause tissue

damage or improper operation of the monitor. Follow directions for

use provided with sensor.

NOTE: Regarding use of NELLCOR sensors:

 Before use, carefully read NELLCOR sensor directions for use.

 Use only NELLCOR oxygen transducers. Use of oxygen transducers

produced by other manufacturers may result in improper

performance.

 Do not use damaged NELLCOR sensors or patient cables. Do not

use a NELLCOR sensor with exposed optical components. Do not

immerse sensor or patient cable in water, solvents, or cleaning

solutions (sensors, cable, and connectors are not waterproof). Do

not sterilize by irradiation, steam, or ethylene oxide. See cleaning

instructions in Directions for Use for reusable NELLCOR sensors

and patient cables.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 169 170

Nessun commento

Escort Prism 20401 Specifiche Pagina 48